OGAN Compatible Hot Melt Glue Hoses
Hot Melt Services Ltd are the sole UK distributor for OGAN heated hoses.
OGAN have been manufacturing industrial hoses since 1986 and have many years’ experience in producing replacement hot melt glue hoses compatible with all leading manufacturers worldwide.
Industrial Heated hoses are designed for applications where the media passing through the hose must be heated, melted but first of all, maintained at constant, elevated temperature. Application for such media as: oil, grease, wax, resins, hot melt adhesives, plastic, paints, granulates, food products.
With decades of experience in heated hoses, OGAN Industrial Heating Hoses are developed and produced to transport materials within specified temperature ranges under high pressure. OGAN Industrial Heating Hoses are being used in a wide range of applications from manual handguns to industrial robotic, for indoors and outdoors and are fully compliant with the systems of leading manufacturers worldwide.
Advantages of using OGAN Heating Hoses are;
- Flexible structure solves the problems related to alignment and machine vibration.
- Provides short heating times and homogeneous heat dissipation.
- Safe, economical and long-lasting hoses.
OGAN Heated Hoses
The pressure hose is chosen depending on the working pressure, temperature and medium output required. We mainly use PTFE hose in stainless steel braid. The material of this hose features outstanding chemical and temperature resistance (up to 250°C), and very low coefficient of friction. PTFE hoses with strong mesh technology are being used to safely transfer the heated products up to 500 bar. The burst pressure of the pressure hoses used at OGAN Heating Hoses is 4 times the maximum working pressure.
Hose Fittings
The hose fittings at both hose ends are selected according to customer’s specification. OGAN hoses can be supplied with fittings compatible with all leading manufacturers.
Heating Element
The heating element is helically wound around the pressure hose to provide accurate and uniform heat density at each point of the hose. The power of the heating element depends on the temperature that must be maintained, the diameter and length of the hose.
OGAN heating hoses have an integrated sensor. According to the process and preferences; PT100, Ni120, NTC, J, K, type heat sensors are used.
Thermal Insulation
Thermal insulation material is applied to reduce the heat loss to minimum and to ensure that the system reaches the specified temperature. Type of thermal insulation depends on working temperature. OGAN heating hoses uses silicone foam up to 250°C.
Connecting Cables
OGAN Heating Hose is equipped with a connecting cable with a preferred length, and with or without a plug. The hoses can be used with a temperature controller of the customer or supplied with various types of temperature controllers.
External Protection
Polyamide braid is usually applied as external jacket of OGAN Heating Hoses, but steel braid, polyurethane braid or silicone braid are also available. The external jacket, meets the static and dynamic bending requirements and ensures that the thermal insulation material and the heating elements remain undamaged.
Hose End Caps
There are two types of hose end caps: hard and soft. The hard caps made of polyamide reduce free, flexible hose length between the fittings, but also reduce the load on the spot of critical fitting-hose connection. Silicone soft caps, due to their flexibility, are recommended for short hoses.
To order your compatible hot melt glue hoses please call Hot Melt Services Ltd on 01509 889 511
For more information about our hot melt adhesive dispensing systems, please contact Hot Melt Services Ltd today on telephone: 01509 889 511 /